Kia K900: Limitations of the system
The ASCC may have limits to its ability to detect distance to the vehicle ahead due to road and traffic conditions.
To convert to cruise control mode
The driver may choose to only use the cruise control mode (speed control function)
by doing as follows:
1.Turn the ASCC on (the cruise indicator light will be on but the system will
not be acti ...
On curves
On curves, the ASCC may not detect a moving vehicle in your lane, and then
your vehicle could accelerate to the set speed. Also, the vehicle speed will
rapidly slow down when the vehicle ahea ...
See also:
ESC operation
ESC ON condition
When the ignition is turned ON, ESC and ESC OFF indicator lights illuminate
for approximately 3 seconds, then ESC is turned on.
Press the ESC OFF button for at least half a ...
Tire sidewall labeling
This information identifies and describes the fundamental characteristics of
the tire and also provides the tire identification number (TIN) for safety standard
certification. The TIN can be use ...
Blind spot detection system (BSD)
The Blind Spot Detection System (BSD) uses a radar sensor to alert the driver.
It senses the rear side territory of the vehicle and provides an indication to
the driver if it detects an object ap ...
Categories
