The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button.
In this case, the system works sequentially according to the order of buttons selected. When pressing any button except the AUTO button while using automatic operation, the functions not selected will be controlled automatically.
1.Start the engine.
2.Set the mode to the desired position.
For improving the effectiveness of heating and cooling;
- Heating:
- Cooling:
3.Set the temperature control to the desired position.
4.Set the air intake control to the outside (fresh) air position.
5.Set the fan speed control to the desired speed.
6.If air conditioning is desired, turn the air conditioning system on.
Press the AUTO button in order to convert to full automatic control of the system.
Rear outlet vents (F)
Information Mode
This mode shows the service interval (mileage and days) and pressure of each
tire.
To change the information mode, Press the
,
(MOVE) button.
For the setting of the service interva ...
82,500 miles (132,000 km) or 66 months
Rotate tires
Inspect air cleaner filter
Inspect fuel lines, fuel hoses and connections
Inspect vapor hose and fuel filler cap
Inspect fuel tank air filter
Inspect vacuum hose
Inspect po ...
Electrical equipment
The electrical system of your vehicle is designed to perform under all reasonably
expected operating conditions. However, before any additional electrical equipment
is installed in your vehicle, c ...