Kia K900: To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal.
Increased speed will not interfere with cruise control operation or change the set speed.
To return to the set speed, take your foot off the accelerator pedal. If you move the lever down (to SET-) at increased speed, the cruising speed will be set again.
To decrease the cruising speed
Follow either of these procedures:
Move the lever down (to SET-) and hold it. Your vehicle will gradually slow
down. Release the lever at the speed you want to maintain.
Move the lever down ...
To cancel cruise control, do one of the following
Depress the brake pedal.
Shift into N (Neutral) with an automatic transaxle.
Move up the lever (to CANCEL) located on the steering wheel.
Decrease the vehicle speed lower than the memory sp ...
See also:
Defogging logic
To reduce the probability of fogging up the inside of the windshield, the air
intake or air conditioning are controlled automatically according to certain conditions
such as or
position. ...
Malfunction Indicator Lamp (MIL)
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
It remains on until the engine is started.
When there is a malfunction with ...
Elapsed Time (3)
The elapsed time is the total driving time since the last elapsed time reset.
Time range (hh:mm): 00:00 ~ 99:59
To reset the elapsed time, press the OK (RESET) button on the steering wheel
...
Categories
