This mode displays the pressure status of each tire.
You can change the tire pressure unit in "User settings" mode.
If engine turns over normally but does not start
1.Check fuel level.
2.With the Engine Start/Stop Button in the OFF position, check all connectors
at ignition coils and spark plugs. Reconnect any that may be disconnected or loose.
3.If the engin ...
Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under
severe driving conditions.
Refer to the chart below for the appropriate maintenance intervals.
R : Replace
I : In ...
Changing rear view angle
1. Top view
When Top View is selected, the rear view angle is displayed as if looking down
from above.
2. Normal view
When Normal View is selected, the rear view angle is displayed in a custo ...