Kia K900: ECO mode (Active ECO)

Active ECO helps improve fuel efficiency by controlling certain engine and transaxle
system operating parameters. Fuel efficiency depends on the driver's driving habit
and road condition.
- When the DRIVE MODE button is pressed and the ECO mode is selected, the
ECO indicator (green) will illuminate to show that the Active ECO is operating.
- When the Active ECO is activated, and the engine start/stop button is turned
off and on it will change to NORMAL mode. To turn on the ECO mode press the
DRIVE MODE button till it is selected.
When Active ECO is activated:
- The acceleration may slightly be reduced eventhough you depress the accelerator
fully.
- The air conditioner performance may be limited
- The shift pattern of the automatic transaxle may change.
- The engine noise may get louder.
The above situations are normal conditions when the active eco system is activated
to improve fuel efficiency.
Limitation of Active ECO operation:
If the following conditions occur while Active ECO is operating, the system operation
is limited even though there is no change in the ECO indicator.
- When the coolant temperature is low: The system will be limited until engine
performance becomes normal.
- When driving up a hill: The system will be limited to gain power when driving
uphill because the engine torque is restricted.
- When using manual mode: The system will be limited according to the shift
location.
- When the accelerator pedal is deeply depressed for a few seconds: The system
will be limited, judging that the driver wants to speed up.
Drive mode / Snow mode
The drive mode may be selected according to the driver’s preference or road condition.
The system initializes to the normal mode after the engine start/stop button
has ...
SPORT mode focuses on dynamic driving by automatically controlling the steering
wheel, engine and transaxle system.
When the DRIVE MODE button is pressed and the SPORT mode is selected ...
See also:
For best battery service
The battery is in the trunk.
Keep the battery securely mounted.
Keep the battery top clean and dry.
Keep the terminals and connections clean, tight, and coated with petroleum
jelly or ter ...
To turn cruise control off, do one of the following
Move the lever up (to CRUISE). (the CRUISE indicator light in the instrument
cluster will go off)
Turn the Engine Start / Stop Button off.
...
Air intake control
This is used to select the outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air position
With the reci ...