The Surround View Monitoring System (SVM) is not a substitute for proper and safe parking procedures.
The Surround View Monitoring System (SVM) may not detect every object surrounding the vehicle. Always drive safely and use caution when parking.
The Surround View Monitoring System (SVM) can assist in parking by allowing the driver to see around the vehicle. Push the button into the [ON] position to operate the system. To cancel the system, push the button again.
Operating conditions When the Engine Start/Stop Button is ON position When the transaxle is on D, N or R When the vehicle speed is not over 12.4 mph (20km/h)
WARNING
This system is a supplementary function only. It is the responsibility of the driver to always check the area around the vehicle before and while moving.
Curtain air bag
Curtain air bags are located along both sides of the roof rails above the front
and rear doors.
They are designed to help protect the heads of the front seat occupants and the
rear outboard sea ...
Electric Parking Brake (EPB) Warning Light
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
It illuminates for approximately 3 seconds and then goes off.
When there is ...
Storing positions into memory using the buttons on the door
Storing driver’s seat positions
1.Check that the shift lever is in P (Park) and the Engine Start/Stop Button
is in the ON position.
2.Adjust the driver seat, outside rearview mirror, HUD* (Head-up ...