Kia K900: ON - Engine Start/Stop button position - Engine start/stop button - Driving your vehicle - KIA K900 2014-2026 Owner's ManualKia K900: ON

Press the ENGINE START/STOP button while it is in the ACC position without depressing


Press the ENGINE START/STOP button while it is in the ACC position without depressing the brake pedal.

The warning lights can be checked before the engine is started. Do not leave the ENGINE START/STOP button in the ON position for a long time. The battery may discharge, because the engine is not running.

ACC(Accessory)
Press the ENGINE START/STOP button while it is in the OFF position without depressing the brake pedal. The steering wheel unlocks and electrical accessories are operational. If the ENGINE START/ ...

Start/Run
To start the engine, depress the brake pedal and press the ENGINE START/STOP button with the shift lever in the P (Park) or the N (Neutral) position. For your safety, start the engine with the s ...

See also:

To resume cruising speed at more than approximately 20 mph (30 km/h)
If any method other than the CRUISE lever was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when you move the lever up (to ...

Locking
Pressing the button of the front outside door handles with all doors closed and any door unlocked, locks all the doors. The hazard warning lights will blink and the chime will sound once to indi ...

Lumbar support (for rear right and left passenger’s seat)
For right side : Press the R switch. The lumbar support can be adjusted by pushing the lumbar support lever. Push the lever to left side (1) increase support or push the lever to the right ...

Copyright © www.k900kia.com 2014-2026