Kia K900: Interior light bulb replacement
1.Using a flat-blade screwdriver, gently pry the lens from the interior light housing.
2.Remove the bulb by pulling it straight out.
WARNING
Prior to working on the Interior Lights, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.
3.Install a new bulb in the socket.
4.Align the lens tabs with the interior light housing notches and snap the lens into place.
5.If the map lamp and room lamp are not operating, have the vehicle checked by an authorized K900 Kia dealer.
CAUTION
Use care not to dirty or damage lens, lens tab, and plastic housings.
License plate lamp replacement
If the light bulb does not operate, we recommend the vehicle be checked by an
authorized K900 Kia dealer.
A skilled technician should check or repair the license plate light, for it may
affect ...
Appearance care
...
See also:
The LDWS may not warn you even if the vehicle leaves the lane, or may warn you
even if the vehicle does not leave the lane when
The lane can't be visible due to snow, rain, stain, a puddle or other environmental
conditions.
The brightness of the outside changes suddenly such as tunnel enter/exit.
Not turning on t ...
Air bag warning label
Air bag warning labels, some required by the U.S. National Highway Traffic Safety
Administration (NHTSA), are attached to alert the driver and passengers of potential
risks of the air bag system ...
To set cruise control speed
1.Move the lever up (to CRUISE), to turn the system on. The CRUISE indicator
light will illuminate.
2.Accelerate to the desired speed, which must be more than 20 mph (30 km/h).
3.Lever must be ...