Kia K900: ASCC will be temporarily canceled when - Speed setting (ASCC) - Advanced Smart Cruise Control system - Driving your vehicle - KIA K900 2014-2026 Owner's ManualKia K900: ASCC will be temporarily canceled when

Cancelled manually


Cancelled manually

The ASCC turns off temporarily when the indicator on the LCD display turns off.

The CRUISE indicator is illuminated continuously.

Cancelled automatically

Each of these actions will cancel the ASCC operation. (the SET indicator, set speed and vehicle to vehicle distance on the LCD display will go off.)

In a condition the ASCC is cancelled automatically, the ASCC will not resume even though the RES+ or SET- lever is moved. Also, the EPB (electronic parking brake) will be applied when the vehicle is stopped.

CAUTION

If the ASCC is cancelled by other than the reasons mentioned, have the system checked by an authorized K900 Kia dealer.

If the system is cancelled, the warning chime will sound and a message will appear


If the system is cancelled, the warning chime will sound and a message will appear for a few seconds.

You must adjust the vehicle speed by depressing the accelerator or brake pedal according to the road condition ahead and driving condition.

Always check the road conditions. Do not rely on the warning chime.

To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with cruise control operation or change the set speed. To ret ...

To resume cruise control set speed
If any method other than the CRUISE lever was used to cancel cruising speed and the system is still activated, the cruising speed will automatically resume when you move the lever up/down (to RE ...

See also:

Advanced Vehicle Safety Management (AVSM) OFF Indicator Light
This indicator light illuminates: Once you set the Engine Start/Stop Button to the ON position. It illuminates for approximately 3 seconds and then goes off. When you deactivate the AVSM sy ...

Turn signals and lane change signals
The Engine Start/Stop Button must be ON position for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel ...

With central door lock switch
Locking When pressing the door lock button (1), all vehicle doors will lock and the indicator on the button will illuminate. If any door is unlocked, the indicator will turn off. If the ...

Copyright www.k900kia.com 2014-2026