Kia K900: BSD (Blind Spot Detection) / LCA (Lane Change Assist)

Blind spot detection system (BSD)

The Blind Spot Detection System (BSD) uses a radar sensor to alert the driver. It senses the rear side territory of the vehicle and provides an indication to the driver if it detects an object ap ...

Operating conditions

The indicator on the switch will illuminate when the Blind Spot Detection System (BSD) switch is pressed with the Engine Start/Stop Button ON. If vehicle speed exceeds about 18.6 mph (30 km/h), t ...

See also:

RCTA (Rear cross traffic alert)
When your vehicle moves backwards from a parking position, the sensor detects approaching vehicles to the left or right side direction and gives information to the driver. Operating conditions ...

If engine doesn't turn over or turns over slowly
1.Be sure the shift lever is in N (Neutral) or P (Park) and the emergency brake is set. 2.Check the battery connections to be sure they are clean and tight. 3.Turn on the interior light. If the li ...

Vehicle recognition
Some vehicles ahead in your lane cannot be recognized by the sensor as follows: - Narrow vehicles such as motorcycles or bicycles - Vehicles offset to one side - Slow-moving vehicles or suddendec ...