Kia K900: To cancel cruise control, do one of the following
- Depress the brake pedal.
- Shift into N (Neutral) with an automatic transaxle.
- Move up the lever (to CANCEL) located on the steering wheel.
- Decrease the vehicle speed lower than the memory speed by 12 mph (20 km/h).
- Decrease the vehicle speed to less than approximately 20 mph (30 km/h).
- Increasing the vehicle speed to more than approximately 125 mph (200 km/h).
- The ESC is operating.
- Downshifting to the 2nd gear with manual mode.
- Operating the EPB switch. Do not operate the parking brake while driving except in an emergency situation.
Each of these actions will cancel cruise control operation (the SET indicator light in the instrument cluster will go off), but it will not turn the system off. If you wish to resume cruise control operation, move up the lever (to RES+) located on your steering wheel. You will return to your previously preset speed.
To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the
accelerator pedal.
Increased speed will not interfere with cruise control operation or change the
set speed.
To ret ...
To resume cruising speed at more than approximately 20 mph (30 km/h)
If any method other than the CRUISE lever was used to cancel cruising speed and
the system is still activated, the most recent set speed will automatically resume
when you move the lever up (to ...
See also:
On curves
On curves, the ASCC may not detect a moving vehicle in your lane, and then
your vehicle could accelerate to the set speed. Also, the vehicle speed will
rapidly slow down when the vehicle ahea ...
Lane Departure Warning System (LDWS) Indicator Light
This indicator light illuminates:
[Green] When you activate the lane departure warning system by pressing
the LDWS button.
[Yellow] When there is a malfunction with the lane departure warni ...
Jack label
The actual Jack label in the vehicle may differ from the illustration. For more
detailed specifications, refer to the label attached to the jack.
1.Model Name
2.Maximum allowable load
3.When us ...
Categories
