Kia K900: Jack label
The actual Jack label in the vehicle may differ from the illustration. For more detailed specifications, refer to the label attached to the jack.
1.Model Name
2.Maximum allowable load
3.When using the jack, set your parking brake.
4.When using the jack, stop the engine.
5.Do not get under a vehicle that is supported by a jack.
6.The designated locations under the frame
7.When supporting the vehicle, the base plate of jack must be vertical under the lifting point.
8.Shift into Reverse gear on vehicles with manual transmission or move the shift lever to the P position on vehicles with automatic transmission.
9.The jack should be used on firm level ground.
10. Jack manufacture
11. Production date
Important - use of compact spare tire
Your vehicle is equipped with a compact spare tire. This compact spare tire takes
up less space than a regular- size tire. This tire is smaller than a conventional
tire and is designed for tempora ...
Towing
...
See also:
Engine Oil Pressure Warning Light
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
It remains on until the engine is started.
When the engine oil pressure is l ...
Warning lights
✽ NOTICE - Warning lights
Make sure that all warning lights are OFF after starting the engine. If any
light is still ON, this indicates a situation that needs attention. ...
Front blind spot monitoring system
The Blind Spot Detection System is not a substitute for proper and safe lane
changing procedures. Always drive safely and use caution when changing lanes. The
Blind Spot Detection System may not ...
Categories
