Kia K900: Fan speed control
The fan speed can be set to the desired speed by pressing the fan speed control button(for front) or turning the fan speed control knob (for rear).
To change the fan speed, press the (
) part of the button for higher speed
or press the (
) part of the button for
lower speed. (for front)
To change the fan speed, turn the knob to the right for higher speed, or left for lower speed. (for rear)
To turn the fan speed control off, press the OFF button.
Air intake control
This is used to select the outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air position
With the reci ...
Air conditioning
Press the A/C button to turn the air conditioning system on (indicator light
will illuminate).
Press the button again to turn the air conditioning system off. ...
See also:
Seat belt warning (for driver’s seat)
The driver's seat belt warning light and chime will activate to the following
table when the ignition switch is in "ON" position.
*1Warning pattern repeats 11 times with an interv ...
Tire pressure monitoring system (TPMS)
(1) Low Tire Pressure Telltale/TPMS Malfunction Indicator
(2) Low Tire Pressure Position Telltale (shown on the LCD display)
Each tire, including the spare (if provided), should be checked monthly ...
Puddle lamp
When all the doors (and trunk) are locked and closed, the puddle lamp will come
on for about 15 seconds if any of the below is performed.
When the door unlock button is pressed on the smart key. ...