Kia K900: Power window lock button
The driver can disable the power window switches on the rear passengers’ doors by pressing the power window lock switch. The indicator will be illuminated.
When the power window lock switch indicator is illuminated :
- The driver’s master control can operate all the power windows.
- The front passenger’s control can operate the front passenger’s power window.
- The rear passenger’s control cannot operate the rear passenger’s power window.
CAUTION
Opening / closing Window
To prevent possible damage to the power window system, do not open or close two windows or more at the same time. This will also ensure the longevity of the fuse.
WARNING
Power windows
Do not allow children to play with the power windows. Keep the driver’s door power window lock button in the LOCK position (illuminated).
Always double check to make sure all arms, hands, head and other obstructions are safely out of the way before closing a window.
Window opening and closing
Pressing or pulling up the power window switch momentarily to the second detent
position (6) completely lowers or lifts the window even when the switch is released.
To stop the window at the desi ...
Hood
...
See also:
Drive mode integrated control system
Drive mode / Snow mode
The drive mode may be selected according to the driver’s preference or road condition.
The system initializes to the normal mode after the engine start/stop button
has ...
Non-Powered Trunk
To open:
1.Make sure the shift lever is in P (Park).
2.Then do one of the following :
Press the smart key trunk unlock button for more than one second. Press the button
on the trunk itself with ...
Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat
belts (retractor pretensioner and EFD (Emergency Fastening Device).
The pre-tensioner seat belts may be act ...
Categories
