Kia K900: TPMS (Tire Pressure
Monitoring System)
malfunction indicator
The TPMS malfunction indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tire Pressure Monitoring System.
Have the system checked by an authorized K900 Kia dealer as soon as possible to determine the cause of the problem.
✽ NOTICE
If there is a malfunction with the TPMS, the low tire pressure position telltale will not be displayed even though the vehicle has an underinflated tire.
CAUTION
- The TPMS malfunction indicator may blink for approximately 1 minute and then remain continuously illuminated if the vehicle is moving around electric power supply cables or radio transmitter such as at police stations, government and public offices, broadcasting stations, military installations, airports, or transmitting towers, etc. This can interfere with normal operation of the Tire Pressure Monitoring System (TPMS).
- The TPMS malfunction indicator may blink for approximately 1 minute and then remain continuously illuminated if the snow chains are used or some separate electronic devices such as notebook computer, mobile charger, remote starter or navigation etc., are used in the vehicle. This can interfere with normal operation of the Tire Pressure Monitoring System (TPMS).
Low tire pressure position telltale
When the tire pressure monitoring system warning indicators are illuminated and
warning massage displayed on the cluster LCD display, one or more of your tires
is significantly under-inflated.
...
Changing a tire with TPMS
If you have a flat tire, the Low Tire Pressure and Position telltales will come
on. Have the flat tire repaired by an authorized K900 Kia dealer as soon as possible
or replace the flat tire with t ...
See also:
Windshield washers
In the OFF position, pull the lever gently toward you to spray washer fluid on
the windshield and to run the wipers 1-3 cycles. Use this function when the windshield
is dirty.
The spray and wip ...
Removable towing hook
1.Open the trunk, and remove the towing hook from the tool case.
2.Remove the hole cover by pressing the lower part of the cover on the front
or rear bumper.
3.Install the towing hook by turning ...
Power windows
The ignition switch must be in the ON position for power windows to operate.
Each door has a power window switch that controls the door’s window.
The driver has a power window lock switch which c ...