Kia K900: To set cruise control speed
1.Move the lever up (to CRUISE), to turn the system on. The CRUISE indicator light will illuminate.
2.Accelerate to the desired speed, which must be more than 20 mph (30 km/h).
3.Lever must be moved down (to SET-) prior to setting any desired speed. The SET indicator light in the instrument cluster will illuminate.
Release the accelerator at the same time. The desired speed will automatically be maintained.
On a steep grade, the vehicle may slow down or speed up slightly while going uphill or downhill.
Cruise control switch
CRUISE :
Turns cruise control system on or off.
CANCEL :
Cancels cruise control operation.
RES+:
Resumes or increases cruise control speed.
SET-:
Sets or decreases cruise control speed. ...
To increase cruise control set speed
Follow either of these procedures:
Move the lever up (to RES+) and hold it. Your vehicle will accelerate. Release
the lever at the speed you want.
Move the lever up (to RES+) and release it ...
See also:
Consumer assistance
Roadside Assistance is provided on all new current model year Kia Vehicles from
the date the vehicle is delivered to the first retail buyer or otherwise put into
use (inservice date), whichever is ...
Engine overheat
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine is probably too hot. If this happens,
you should:
1.Pull off the road ...
Warning indicator
If the LDWS warning indicator (yellow) comes on, the LDWS is not working properly.
Take your vehicle to an authorized K900 Kia dealer and have the system checked. ...
Categories
