Kia K900: Removable towing hook
1.Open the trunk, and remove the towing hook from the tool case.
2.Remove the hole cover by pressing the lower part of the cover on the front or rear bumper.
3.Install the towing hook by turning it clockwise into the hole until it is fully secured.
4.Remove the towing hook and install the cover after use.
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
K900 Kia dealer or a commercial tow-truck service.
Proper lifting and towing procedures are necessary to prevent dam ...
Emergency towing
If towing is necessary, have it done by an authorized K900 Kia dealer or a commercial
tow truck service.
If towing service is not available in an emergency, your vehicle may be temporarily
towe ...
See also:
Front lamp switch
: Press the button
to turn the lamp on. This light produces a spot beam for convenient use as a
map lamp at night or as a personal lamp for the driver and the front passenger.
To ...
One time driving information mode
This display shows trip distance (1) and the vehicle can be driven with the remaining
fuel (2).
This information is displayed for a few seconds when you turn off the engine
and then goes off au ...
Blind spot detection system (BSD)
The Blind Spot Detection System (BSD) uses a radar sensor to alert the driver.
It senses the rear side territory of the vehicle and provides an indication to
the driver if it detects an object ap ...
Categories
