If a tire goes flat while you are driving:
1.Take your foot off the accelerator pedal and let the car slow down while driving straight ahead. Do not apply the brakes immediately or attempt to pull off the road as this may cause a loss of control. When the car has slowed to such a speed that it is safe to do so, brake carefully and pull off the road. Drive off the road as far as possible and park on firm, level ground. If you are on a divided highway, do not park in the median area between the two traffic lanes.
2.When the car is stopped, turn on your emergency hazard flashers, set the parking brake and put the shift lever in P.
3.Have all passengers get out of the car. Be sure they all get out on the side of the car that is away from traffic.
4.When changing a flat tire, follow the instruction provided later in this section.
Instrument panel fuse replacement
1.Turn the ignition switch and all other switches off.
2.Lift the end of strip (1) up.
3.Press the fastener head with screw driver and then pull the fastener out.
4.Lift the rear portion of sma ...
TPMS (Tire Pressure
Monitoring System)
malfunction indicator
The TPMS malfunction indicator will
illuminate after it blinks for approximately
one minute when there is a
problem with the Tire Pressure
Monitoring System.
Have the system checked by an
auth ...
1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution
caused by blow-by gases being emitted from the crankcase.
This system supplies fresh filtered air to the crankcase thr ...