Kia K900: Rear curtain
To raise the rear curtain, depress the button. To lower the rear curtain, depress the button again.
The rear curtain will be lowered automatically when you shift the shift lever into R (Reverse) and raised automatically when you shift the shift lever from R (Reverse) into P (Park).
After the rear curtain is lowered by shifting the shift lever into R (Reverse), if you drive more than 12mph (20km/h) with the shift lever in D (Drive), the rear curtain will be raised automatically.
You can activate or deactivate the rear curtain button on the rear armrest by using the REAR LOCK button on the rear armrest or “System Settings” in AVN (Audio, Video, and Navigation).
Detailed information for “System Settings” is described in a separately supplied manual.
If the REAR LOCK button activated (LED “ON”), you can not activate the rear curtain button.
After deactivating (LED “OFF”) the REAR LOCK button, you can activate the rear curtain button.
If the REAR LOCK button has activated through AVN, you can deactivate the REAR LOCK button only through AVN.
CAUTION
Do not lower or raise the rear curtain by hand. It could cause motor failure.
Luggage net (holder)
To keep items from shifting in the cargo area, you can use the holders located
in the cargo area to attach the luggage net.
CAUTION
To prevent damage to the goods or the vehicle, care should be ...
Side curtain
To use the side curtain:
1.Lift the curtain by the hook (1).
2.Hang the curtain on both sides of the hook.
3.Pull the curtain backward by the hook (2).
4.Hang the curtain on the hook. ...
See also:
To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the
accelerator pedal.
Increased speed will not interfere with cruise control operation or change the
set speed.
To ret ...
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
K900 Kia dealer or a commercial tow-truck service.
Proper lifting and towing procedures are necessary to prevent dam ...
Light bulbs
WARNING
Working on the lights
Prior to working on the light, firmly apply the parking brake, ensure that
the ignition switch is turned to the LOCK position and turn off the lights to avoid
sudde ...