Kia K900: Air intake control - Manual heating and air conditioning - Automatic climate control system - Features of your vehicle - KIA K900 2014-2019 Owner's ManualKia K900: Air intake control

This is used to select the outside (fresh) air position or recirculated air position.


This is used to select the outside (fresh) air position or recirculated air position.

To change the air intake control position, push the control button.

Recirculated air position

With the recirculated air position selected, air from the passenger compartment


With the recirculated air position selected, air from the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.

When driving at high speed, the outside air may come in to circulate the air inside the vehicle.

To block the air from entering, press the air intake control button for about 2 seconds. The outside air will be blocked from coming in for 3 minutes.

Outside (fresh) air position

With the outside (fresh) air position selected, air enters the vehicle from outside


With the outside (fresh) air position selected, air enters the vehicle from outside and is heated or cooled according to the function selected.

✽ NOTICE

Prolonged operation of the heater in the recirculated air position (without air conditioning selected) may cause fogging of the windshield and side windows and the air within the passenger compartment may become stale. In addition, prolonged use of the air conditioning with the recirculated air position selected will result in excessively dry air in the passenger compartment.

WARNING

Temperature control
The temperature will increase to the maximum (HI) by pushing the up () button (for front) or turn the knob to the right (for rear). The temperature will decrease to the minimum (Lo) by pushing th ...

Fan speed control
The fan speed can be set to the desired speed by pressing the fan speed control button(for front) or turning the fan speed control knob (for rear). To change the fan speed, press the ( ) part of ...

See also:

Disc brakes wear indicator
When your brake pads are worn and new pads are required, you will hear a high-pitched warning sound from your front brakes or rear brakes. You may hear this sound come and go or it may occur whene ...

To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with cruise control operation or change the set speed. To ret ...

Seat belt warning (for driver’s seat)
The driver's seat belt warning light and chime will activate to the following table when the ignition switch is in "ON" position. *1Warning pattern repeats 11 times with an interv ...

Copyright © www.k900kia.com 2014-2019