Kia K900: Installation
1.Recline the seatback (2) with the recliner control switch (1).

For manual type
2.Put the headrest poles (3) into the holes while pressing the release button (4).
3.Recline the seatback (6) with the recliner control switch (5).
4.Adjust the headrest to the appropriate height.

For power type
2.Raise it as far as it can go by pulling the switch up (3).
3.Put the headrest poles (4) into the holes and then pull the switch down (5) until the headrest moves to the lowest position.
4.To install the headrest securely, move the headrest up and down 2 or 3 times by pulling the switch up and down.
5.Recline the seatback (7) with the recliner control switch (6).
6.Adjust the headrest to the appropriate height.

Electronic active headrest
The electronic active headrest is designed to move the headrest forward and upward when impact sensor detects a rear impact.
This helps to prevent the driver's and front passenger’s heads from moving backward during a collision.
CAUTION
Do not damage the Active Headrest. Headrests can provide critical neck and head support in a crash.
Removal
Rear seat adjustment - for power seatTo defog inside windshield
1.Set the fan speed to the desired position.
2.Select desired temperature.
3.Press the defrost button ( ).
4.The air conditioning will be turned on according to the detected ambient temperature
...
Restrictions in Handling Keys
When leaving keys with parking lot and valet attendants, the following procedures
will ensure your vehicle’s trunk and glove box compartment can only be opened with
the mechanical key.
To loc ...
Condition and operation in the front passenger occupant detection system
*1 : The system judges a person of adult size as an adult. When a smaller adult
sits in the front passenger seat, the system may recognize him/her as a child depending
on his/her physique and po ...