Kia K900: Rear seat adjustment - for power seat
The rear seat can be adjusted by using the control switches located on the door.
WARNING
The power seat is operable with the Engine Start/Stop Button in OFF. Therefore, children should never be left unattended in the vehicle.
CAUTION
- The power seat is driven by electric motors. Stop operating once the adjustment is completed. Excessive operation may damage the electrical equipment.
- When in operation, the power seat consumes a large amount of electrical power. To prevent unnecessary battery drain, don’t adjust the power seat longer than necessary while the engine is not running.
- Do not operate two or more power seat control switches at the same time. Doing so may result in power seat motor or electrical component malfunction.
WARNING
Use extreme caution so that hands or other objects are not caught in the seat mechanisms while the seat is moving. Do not adjust the seat while wearing seat belts. Moving the seat cushion forward may cause strong pressure on the abdomen.
WARNING
Do not operate the rear power seat while the child seat is installed.
- Forward, backward and seatback angle (for power seat)
- Easy access switch (for power seat)
- Additional switches for adjusting the front passenger seat
- Lumbar support (for rear right and left passenger’s seat)
- Rear switches operating limitation
- Headrest (for rear seat)
- Armrest
- Carrying long / narrow cargo (for fixed seat, if equipped)
Installation
1.Recline the seatback (2) with the recliner control switch (1).
For manual type
2.Put the headrest poles (3) into the holes while pressing the release button
(4).
3.Recline the seatback (6) ...
Forward, backward and seatback angle (for power seat)
Push the control switch forward or backward to move the seat to the desired position.
Release the switch once the seat reaches the desired position. ...
See also:
System warning
If you try to drive off depressing the accelerator pedal with the EPB applied,
but doesn't release automatically, a warning will sound and a message will appear.
If the driver's seat ...
Warning message
The message will appear to notify the driver if there are foreign substances
on the rear bumper or it is hot near the rear bumper. The light on the switch and
the system will turn off automatica ...
Malfunction Indicator Lamp (MIL)
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
It remains on until the engine is started.
When there is a malfunction with ...
Categories
