Kia K900: To set cruise control speed
1.Move the lever up (to CRUISE), to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate.
2. Accelerate to the desired speed.
- 20 mph (30 km/h) ~ 110 mph (180 km/h) : when there is no vehicle in front
- 0 mph (0 km/h) ~ 110 mph (180 km/h) : when there is a vehicle in front
3.Lever must be moved down (to SET-) prior to setting any desired speed. The SET indicator light, set speed and vehicle to vehicle distance on the LCD screen will illuminate.
4.Release the accelerator pedal. The desired speed will automatically be maintained.
To increase cruise control set speed
Follow either of these procedures:
Move the lever up (to RES+), and hold it. Your vehicle set speed will increase
by 5 mph (10 km/h). Release the lever at the speed you want.
Move the lever ...
See also:
One time driving information mode
This display shows trip distance (1) and the vehicle can be driven with the remaining
fuel (2).
This information is displayed for a few seconds when you turn off the engine
and then goes off au ...
Rear seat storage
To open the rear seat storage, pull up the lever. ...
Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher
than the bottom of the wheel hub. Drive through any water slowly.
Allow adequate stopping distance because brake perfo ...
Categories
