Kia K900: To defrost outside windshield
1.Set the fan speed to the highest position.
2.Set the temperature to the extreme hot (HI) position.
3.Press the defrost button ( 
).
4.The air conditioning will be turned on according to the detected ambient temperature and outside (fresh) air position will be selected automatically.
If the 
position is selected, lower
fan speed is adjusted to a higher fan speed.
To defog inside windshield
1.Set the fan speed to the desired position.
2.Select desired temperature.
3.Press the defrost button ( ).
4.The air conditioning will be turned on according to the detected ambient temperature
...
Defogging logic
To reduce the probability of fogging up the inside of the windshield, the air
intake or air conditioning are controlled automatically according to certain conditions
such as or
position. ...
See also:
Turn signals and lane change signals
The Engine Start/Stop Button must be ON position for the turn signals to function.
To turn on the turn signals, move the lever up or down (A). The green arrow indicators
on the instrument panel ...
To increase cruise control set speed
Follow either of these procedures:
Move the lever up (to RES+) and hold it. Your vehicle will accelerate. Release
the lever at the speed you want.
Move the lever up (to RES+) and release it ...
Temperature control
The temperature will increase to the maximum (HI) by pushing the up ()
button (for front) or turn the knob to the right (for rear).
The temperature will decrease to the minimum (Lo) by pushing th ...
Categories
