1.Carry the smart key or leave it inside the vehicle.
2.Make sure the parking brake is firmly applied
3.Place the transaxle shift lever in P (Park).
4.Press the ENGINE START/STOP button while depressing the brake pedal.
5.In extremely cold weather (below 0°F / -18°C) or after the vehicle has not been operated for several days, let the engine warm up without depressing the accelerator.
Whether the engine is cold or warm, it should be started without depressing the accelerator.
The engine will start only when the smart key is in the vehicle.
WARNING
Unintended vehicle movement
Never leave the smart key in the vehicle with children or vehicle occupants who are unfamiliar with the vehicle operation. Pushing the ENGINE START/STOP button while the smart key is in the vehicle may result in unintended engine activation and/or unintended vehicle movement.
If the battery is weak or the smart key does not work correctly, you can start the engine by pressing the engine start/stop button with the smart key.
The side with the lock button should contact the engine start/stop button directly.
When you press the engine start/stop button directly with the smart key, the smart key should contact the button at a right angle.
When the stop lamp fuse is blown, you can't start the engine normally. Replace the fuse with a new one. If it is not possible, you can start the engine by pressing the ENGINE START/STOP button for 10 seconds while it is in the ACC position.
The engine can start without depressing the brake pedal. But for your safety always depress the brake pedal before starting the engine.
Do not press the ENGINE START/ STOP button for more than 10 seconds except when the stop lamp fuse is blown.
Seat belt restraint system
Seat belts are designed to bear upon the bony structure of the body, and should
be worn low across the pelvis, chest and shoulders as applicable. wearing the lap
section of the belt across the abd ...
LCD Modes
For controlling the LCD modes, refer to "LCD Display Control" in this chapter ...
Installation
1.Recline the seatback (2) with the recliner control switch (1).
For manual type
2.Put the headrest poles (3) into the holes while pressing the release button
(4).
3.Recline the seatback (6) ...