If the front passenger seat is occupied by a person that the system determines to be of adult size, and he/she sits properly (sitting upright with the seatback in an upright position, centered on the seat cushion with their seat belt on, legs comfortably extended and their feet on the floor), the PASSENGER AIR BAG “OFF” indicator will turn off and the front passenger's air bag will be able to inflate, if necessary, in frontal crashes.
You will find the PASSENGER AIR BAG “OFF” indicator on the center facia panel. This system detects the conditions 1~4 in the following table and activates or deactivates the front passenger air bag based on these conditions.
Always be sure that you and all vehicle occupants are seated and restrained properly (sitting upright with the seat in an upright position, centered on the seat cushion, with the person’s legs comfortably extended, feet on the floor, and wearing the safety belt properly) for the most effective protection by the air bag and the safety belt.
The ODS (Occupant Detection System) may not function properly if the passenger takes actions which can defeat the detection system.
These include:
(1) Failing to sit in an upright position.
(2) Leaning against the door or center console.
(3) Sitting towards the sides or the front of the seat.
(4) Putting legs on the dashboard or resting them on other locations which reduce the passenger weight on the front seat.
(5) Improperly wearing the safety belt.
(6) Reclining the seat back.
(7)Wearing a thick cloth like ski wear or hip protection wear.
(8) Put on the seat an additional thick cushion.
Power window lock button
The driver can disable the power window switches on the rear passengers’ doors
by pressing the power window lock switch. The indicator will be illuminated.
When the power window lock switch indic ...
Locking
Pressing the button of the front outside door handles with all doors closed and
any door unlocked, locks all the doors. The hazard warning lights will blink and
the chime will sound once to indi ...
Windshield wipers
Operates as follows when the Engine Start/Stop Button is turned ON.
MIST :
For a single wiping cycle, push the lever upward and release it with the lever
in the OFF position. The wipers will op ...