1.Be sure the vehicle is on level ground.
2.Start the engine and allow it to reach normal operating temperature.
3.Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil pan.
4.Pull the dipstick out, wipe it clean, and re-insert it fully.
WARNING
Radiator hose
Be very careful not to touch the radiator hose when checking or adding the engine oil as it may be hot enough to burn you.
5.Pull the dipstick out again and check the level. The level should be between F and L.
CAUTION
If it is near or at L, add enough oil to bring the level to F. Do not overfill.
Use a funnel to help prevent oil from being spilled on engine components.
Temperature control
The temperature will increase to the maximum (HI) by pushing the up ()
button (for front) or turn the knob to the right (for rear).
The temperature will decrease to the minimum (Lo) by pushing th ...
Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning
is reduced. Overfilling also has a negative impact on the air conditioning system.
Therefore, if abnormal operation is ...
Sliding the sunroof
When the sunshade is closed
If you pull the sunroof control lever backward to the second detent position,
the sunshade will slide all the way open, then the sunroof glass will slide all
the way ...