Kia K900: Driver position memory system
A driver position memory system is provided to store and recall the driver seat, outside rearview mirror, HUD* (Head-Up Display), bright ness of the instrument cluster illumination and steering wheel positions with a simple button operation.
By saving the desired positions into the system memory, different drivers can reposition the driver seat, outside rearview mirror and steering wheel based upon their driving preference.
If the battery is disconnected, the position memory will be lost and the driving positions should be restored in the system.
WARNING
Never attempt to operate the driver position memory system while the vehicle is moving. This could result in loss of control, and an accident causing death, serious injury, or property damage.
Cushion length adjustment (for driver’s seat)
Push the control switch forward or backward to move the seat cushion to the desired
length. Release the switch once the seat cushion reaches the desired length. ...
Storing positions into memory using the buttons on the door
Storing driver’s seat positions
1.Check that the shift lever is in P (Park) and the Engine Start/Stop Button
is in the ON position.
2.Adjust the driver seat, outside rearview mirror, HUD* (Head- ...
See also:
One time driving information mode
This display shows trip distance (1) and the vehicle can be driven with the remaining
fuel (2).
This information is displayed for a few seconds when you turn off the engine
and then goes off au ...
Tire chains
Tire chains, if necessary, should be installed on the drive wheels (rear wheels).
Be sure that the chains are installed in accordance with the manufacturer's instructions.
To minimize tire and c ...
Recommended SAE viscosity number
Always be sure to clean the area around any filler plug, drain plug, or dipstick
before checking or draining any lubricant. This is especially important in dusty
or sandy areas and when the vehicl ...
Categories
