Kia K900: Electronic Brake force Distribution (EBD) System Warning Light
These two warning lights illuminate at the same time while driving:
When the ABS and regular brake system may not work normally. In this case, have your vehicle inspected by an authorized K900 Kia dealer.
WARNING
Electronic Brake force Distribution (EBD) System Warning Light
When both ABS and Parking Brake & Brake Fluid Warning Lights are on, the brake system will not work normally and you may experience an unexpected and dangerous situation during sudden braking. In this case, avoid high speed driving and abrupt braking. Have your vehicle inspected by an authorized K900 Kia dealer as soon as possible.
✽ NOTICE - Electronic Brake force Distribution (EBD) System Warning Light
When the ABS Warning Light is on or both ABS and Parking Brake & Brake Fluid Warning Lights are on, the speedometer, odometer, or tripmeter may not work. Also, the EPS Warning Light may illuminate and the steering effort may increase or decrease. In this case, have your vehicle inspected by an authorized K900 Kia dealer as soon as possible.
Anti-lock Brake System (ABS) Warning Light
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
It illuminates for approximately 3 seconds and then goes off.
When there is ...
Malfunction Indicator Lamp (MIL)
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
It remains on until the engine is started.
When there is a malfunction with ...
See also:
Driving off-road
Drive carefully off-road because your vehicle may be damaged by rocks or roots
of trees. Become familiar with the off-road conditions where you are going to drive
before you begin driving. ...
Electronic Hydraulic Power Steering (EHPS)
This system uses an electromotor to assist you with steering the vehicle.
If the engine is turned off or if the EHPS becomes inoperative, you may still
steer the vehicle, but it will require increa ...
Check spark plugs and ignition system
Inspect your spark plugs as described in section 7 and replace them if necessary.
Also check all ignition wiring and components to be sure they are not cracked, worn
or damaged in any way. ...
Categories
