Kia K900: To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal.
Increased speed will not interfere with cruise control operation or change the set speed.
To return to the set speed, take your foot off the accelerator.
If you move the lever down (to SET-) at increased speed, the cruising speed will be set again.
✽ NOTICE
Be careful when accelerating temporarily, because the speed is not regulated automatically at this time even if there is a vehicle in front of you.
To decrease the crusie control set speed
Follow either of these procedures:
Move the lever down (to SET-), and hold it. Your vehicle set speed will
decrease by 5 mph (10 km/h). Release the lever at the speed you want.
Move the lev ...
ASCC will be temporarily canceled when
Cancelled manually
The brake pedal is depressed.
Move down the lever (to CANCEL) located on the steering wheel.
The ASCC turns off temporarily when the indicator on the LCD display turns of ...
See also:
Cruise SET Indicator Light
This indicator light illuminates:
When the cruise control speed is set. ...
Engine number
The engine number is stamped on the engine block as shown in the drawing. ...
Emergency braking
If there is a problem with the brake pedal while driving, emergency braking is
possible by pulling up and holding the EPB switch. Braking is possible only while
you are holding the EPB switch.
WA ...