Kia K900: Vehicle weight - Driving your vehicle - KIA K900 2014-2019 Owner's ManualKia K900: Vehicle weight

This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer.

Properly loading your vehicle will provide maximum return of the vehicle design performance. Before loading your vehicle, familiarize yourself with the following terms for determining your vehicle's weight ratings, with or without a trailer, from the vehicle's specifications and the compliance label:

Base curb weight

This is the weight of the vehicle including a full tank of fuel and all standard equipment. It does not include passengers, cargo, or optional equipment.

Vehicle curb weight

This is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket equipment.

Cargo weight

This figure includes all weight added to the Base Curb Weight, including cargo and optional equipment.

GAW (Gross axle weight)

This is the total weight placed on each axle (front and rear) - including vehicle curb weight and all payload.

GAWR (Gross axle weight rating)

This is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the compliance label.

The total load on each axle must never exceed its GAWR.

GVW (Gross vehicle weight)

This is the Base Curb Weight plus actual Cargo Weight plus passengers.

GVWR (Gross vehicle weight rating)

This is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the certification label located on the driver’s door sill.

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Ve ...

What to do in an emergency
...

See also:

Changing tires
1.Park on a level surface and apply the parking brake firmly. 2.Shift the shift lever into P (Park). 3.Activate the hazard warning flasher. 4.Remove the wheel lug nut wrench, jack, jack handle, ...

Fan speed control
The fan speed can be set to the desired speed by pressing the fan speed control button(for front) or turning the fan speed control knob (for rear). To change the fan speed, press the ( ) part of ...

Map pocket
The map pocket is provided on the doors. CAUTION Be careful not to nip fingers when using the pocket. ...

Copyright © www.k900kia.com 2014-2019