Kia K900: Driver position memory system
A driver position memory system is provided to store and recall the driver seat, outside rearview mirror, HUD* (Head-Up Display), bright ness of the instrument cluster illumination and steering wheel positions with a simple button operation.
By saving the desired positions into the system memory, different drivers can reposition the driver seat, outside rearview mirror and steering wheel based upon their driving preference.
If the battery is disconnected, the position memory will be lost and the driving positions should be restored in the system.
WARNING
Never attempt to operate the driver position memory system while the vehicle is moving. This could result in loss of control, and an accident causing death, serious injury, or property damage.
Cushion length adjustment (for driver’s seat)
Push the control switch forward or backward to move the seat cushion to the desired
length. Release the switch once the seat cushion reaches the desired length. ...
Storing positions into memory using the buttons on the door
Storing driver’s seat positions
1.Check that the shift lever is in P (Park) and the Engine Start/Stop Button
is in the ON position.
2.Adjust the driver seat, outside rearview mirror, HUD* (Head- ...
See also:
Emergency starting
Connect cables in numerical order and disconnect in reverse order.
✽ NOTICE
Your vehicle has a battery in the trunk compartment, but when you jump start
your vehicle, use the jumper termi ...
Low Tire Pressure Warning Light
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
It illuminates for approximately 3 seconds and then goes off.
When one or mo ...
Non-operational conditions of parking assist system
Parking assist system may not operate normally when:
1.Moisture is frozen to the sensor. (It will operate normally when moisture melts.)
2.Sensor is covered with foreign matter, such as snow or wate ...
Categories
