Kia K900: Engine compartment fuse replacement

1.Turn the ignition switch and all other switches off.

2.Remove the fuse panel cover by pressing the tab and pulling up.

3.Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.

4.Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized K900 Kia dealer.

CAUTION

After checking the fuse panel in the engine compartment, securely install the fuse panel cover. If not, electrical failures may occur from water contact.

Main fuse

If the main fuse is blown, it must be removed as follows:

1.Remove the fuse panel cover on the right side in the engine compartment.

2.Remove the nuts shown in the picture above.

3.Replace the fuse with a new one of the same rating.

4.Reinstall in the reverse order of removal.

✽ NOTICE

If the main fuse is blown, consult an authorized K900 Kia dealer.

Multi fuse

If the multi fuse is blown, it must be removed as follows:

1.Disassemble the negative cable of battery.

2.Remove the nuts shown in the picture above.

3.Replace the fuse with a new one of the same rating.

4.Reinstall in the reverse order of removal.

✽ NOTICE

If the multi fuse is blown, consult an authorized K900 Kia dealer.