Kia K900: To defog inside windshield
1.Set the fan speed to the desired position.
2.Select desired temperature.
3.Press the defrost button ( 
).
4.The air conditioning will be turned on according to the detected ambient temperature and outside (fresh) air position will be selected automatically.
If the air conditioning and outside (fresh) air position are not selected automatically,
adjust the corresponding button manually. If the
position is selected, lower fan speed
is adjusted to a higher fan speed.
Windshield defrosting and defogging
WARNING
Windshield heating
Do not use the or
position during cooling operation in
extremely humid weather. The difference between the temperature of the outside air
and that of th ...
To defrost outside windshield
1.Set the fan speed to the highest position.
2.Set the temperature to the extreme hot (HI) position.
3.Press the defrost button ( ).
4.The air conditioning will be turned on according to the dete ...
See also:
Engine compartment fuse panel (Driver’s side)
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to your vehicle.
It is accurate at the time of printing. When you inspect the fuse panel in your
vehicle, refer ...
Malfunction indicator
The AVSM OFF indicator will illuminate when the Engine Start/Stop Button is turned
ON, but should go off after approximately 3 seconds.
If the indicator does not come on, or continuously remains ...
To convert to cruise control mode
The driver may choose to only use the cruise control mode (speed control function)
by doing as follows:
1.Turn the ASCC on (the cruise indicator light will be on but the system will
not be acti ...
Categories
