The temperature will increase to the maximum (HI) by pushing the up ()
button (for front) or turn the knob to the right (for rear).
The temperature will decrease to the minimum (Lo) by pushing the down (
) button (for front) or turn the knob
to the left (for rear).
When pushing the button (for front) or turning the knob (for rear), the temperature will increase or decrease by 0.5°C/1°F. When set to the lowest temperature setting, the air conditioning will operate continuously.
Adjusting the driver, passenger and rear side temperature equally
1. Press the SYNC button to activate SYNC mode. The passenger and rear side temperature will be set to the same temperature as the driver side temperature.
2. Press the driver side temperature control button. The driver, passenger and rear side temperature will be adjusted equally.
Adjusting the driver, passenger and rear side temperature individually
Temperature conversion
You can switch the temperature mode from Centigrade to Fahrenheit as follows:
While pressing the OFF button, press the AUTO button for 3 seconds or more.
The display will change from Centigrade to Fahrenheit, or from Fahrenheit to Centigrade.
If the battery has been discharged or disconnected, the temperature mode display will reset to Fahrenheit.
Panoramic sunroof
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof
with the sunroof control lever located on the overhead console.
The sunroof can only be opened, closed, or tilted wh ...
Malfunction indicator
The AVSM OFF indicator will illuminate when the Engine Start/Stop Button is turned
ON, but should go off after approximately 3 seconds.
If the indicator does not come on, or continuously remains ...
Turn By Turn (TBT) Mode
This mode displays the state of the navigation. ...