Kia K900: Pre-Safe Seat belt (PSB)
The pre-safe seat belt will activate and pull the seat belt into tighter contact against the occupant's body if a collision is detected or during certain driving maneuvers.
CAUTION
The pre-safe seat belt activates only when the passenger is wearing his/her seat belt.
The pre-safe seat belt warning light will illuminate if there is a problem with your pre-safe seat belt.
Have the system checked if:
- The light does not turn on briefly when you turn the engine start/stop button to the ON position.
- The light stays on after illumination for approximately 3 seconds.
- The light comes on while the vehicle is in motion.
The pre-safe seat belt system operates as below
- The seat belt is tightened when: The vehicle senses a collision Emergency braking situation occurs Loss of vehicle control
- The seat belt vibrates when: The vehicle detects and object too close to the vehicle
Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat
belts (retractor pretensioner and EFD (Emergency Fastening Device).
The pre-tensioner seat belts may be act ...
Seat belt precautions
Infant or small child
All 50 states have child restraint laws. You should be aware of the specific
requirements in your state.
Child and/or infant seats must be properly placed and installed in th ...
See also:
Warning type
The system will activate when:
1.The system is on
2.Vehicle speed is above about 18.6 mph (30 km/h)
3.Other vehicles are detected in the rear side
If a vehicle is detected within the boundary of ...
Start/Run
To start the engine, depress the brake pedal and press the ENGINE START/STOP
button with the shift lever in the P (Park) or the N (Neutral) position. For your
safety, start the engine with the s ...
Normal maintenance schedule
The following maintenance services must be performed to ensure good emission
control and performance.
Keep receipts for all vehicle emission services to protect your warranty.
Where both mileage ...