The mode selection button controls the direction of the air flow through the ventilation system.
The air flow outlet port is converted as follows:
Face-Level (B, C, D, E, F, G)
Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet.
Bi-Level (B, C, D, E, F, G)
Air flow is directed towards the face and the floor.
Floor & Defrost (A, C, D, E, F, G)
Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters.
Floor-Level (A, C, D, E, F, G)
Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters.
Defrost-Level (A)
Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters.
Instrument panel vents
The outlet vents can be opened or closed separately using the horizontal thumbwheel. To close the vent, rotate it left to the maximum position. To open the vent, rotate it right to the desired position.
Also, you can adjust the direction of air delivery from these vents using the vent control lever as shown.
When the battery is discharged
When the battery is discharged, the automatic transmission (shift by wire) is
not shifted.
In emergency, if you want to shift into [N], follow actions
You can shift into [N] by using the driver ...
Tire chains
Tire chains, if necessary, should be installed on the drive wheels (rear wheels).
Be sure that the chains are installed in accordance with the manufacturer's instructions.
To minimize tire and c ...
Auto control
The rain sensor located on the upper end of the windshield glass senses the amount
of rainfall and controls the wiping cycle for the proper interval.
The more it rains, the faster the wiper opera ...