The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button.
In this case, the system works sequentially according to the order of buttons selected. When pressing any button except the AUTO button while using automatic operation, the functions not selected will be controlled automatically.
1.Start the engine.
2.Set the mode to the desired position.
For improving the effectiveness of heating and cooling;
- Heating:
- Cooling:
3.Set the temperature control to the desired position.
4.Set the air intake control to the outside (fresh) air position.
5.Set the fan speed control to the desired speed.
6.If air conditioning is desired, turn the air conditioning system on.
Press the AUTO button in order to convert to full automatic control of the system.
Rear outlet vents (F)
Seatback pocket
The seatback pocket is provided on the back of the front passenger’s and driver’s
seatbacks.
WARNING
Seatback pocket
Do not put heavy or sharp objects in the seatback pocket. An occupant could ...
Installing a child restraint on a front passenger’s seat is forbidden
Never place a rear-facing child restraint in the front passenger’s seat. If the
air bag deploys, it would impact the rear-facing child restraint, causing serious
or fatal injury.
In addition, d ...
User setting mode
1.In user setting mode select the AVSM.
2.If you select [OFF], the warning for collision or brake control is cancelled
and [AVSM OFF] indicator will turn on. If you select [ON], the warning for c ...