Hill start Assist Control is a comfort function. The main intent is to prevent the vehicle from rolling backwards while driving uphill on an inclined surface. HAC holds the braking pressure builtup by driver during stopping procedure for 2 seconds after releasing brake pedal.
During the pressure-hold period, the driver has enough time to press the accelerator pedal to drive off. The braking pressure is reduced as soon as the system detects the driver’s intention to drive off.
WARNING
Activating HAC
Drivers should pay close attention when activating the HAC. The vehicle may roll backward causing an accident due to insufficient brake hold pressure.
Information Mode
This mode shows the service interval (mileage and days) and pressure of each
tire.
To change the information mode, Press the
,
(MOVE) button.
For the setting of the service interva ...
To resume cruise control set speed
If any method other than the CRUISE lever was used to cancel cruising speed and
the system is still activated, the cruising speed will automatically resume when
you move the lever up/down (to RE ...
Starting the engine
WARNING
Proper footwear
Always wear appropriate shoes when operating your vehicle. Unsuitable shoes
(high heels, ski boots, sandals, etc.) may interfere with your ability to use the
brake and ac ...