Kia K900: Fan speed control
The fan speed can be set to the desired speed by pressing the fan speed control button(for front) or turning the fan speed control knob (for rear).
To change the fan speed, press the (
) part of the button for higher speed
or press the (
) part of the button for
lower speed. (for front)
To change the fan speed, turn the knob to the right for higher speed, or left for lower speed. (for rear)
To turn the fan speed control off, press the OFF button.
Air intake control
This is used to select the outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air position
With the reci ...
Air conditioning
Press the A/C button to turn the air conditioning system on (indicator light
will illuminate).
Press the button again to turn the air conditioning system off. ...
See also:
Seat belt warning (for front passenger’s seat)
The front passenger's seat belt warning light will activate to the following
table when the ignition switch is in "ON" position.
*1 The seat belt warning light will go off if the ...
Air cleaner
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner element.
Clean the filter by using compressed air.
Main ...
To defog inside windshield
1.Set the fan speed to the desired position.
2.Select desired temperature.
3.Press the defrost button ( ).
4.The air conditioning will be turned on according to the detected ambient temperature
...