1.Turn the ignition switch and all other switches off.
2.Remove the fuse panel cover by pressing the tab and pulling up.
3.Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
4.Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized K900 Kia dealer.
CAUTION
After checking the fuse panel in the engine compartment, securely install the fuse panel cover. If not, electrical failures may occur from water contact.
Main fuse
If the main fuse is blown, it must be removed as follows:
1.Remove the fuse panel cover on the right side in the engine compartment.
2.Remove the nuts shown in the picture above.
3.Replace the fuse with a new one of the same rating.
4.Reinstall in the reverse order of removal.
✽ NOTICE
If the main fuse is blown, consult an authorized K900 Kia dealer.
Multi fuse
If the multi fuse is blown, it must be removed as follows:
1.Disassemble the negative cable of battery.
2.Remove the nuts shown in the picture above.
3.Replace the fuse with a new one of the same rating.
4.Reinstall in the reverse order of removal.
✽ NOTICE
If the multi fuse is blown, consult an authorized K900 Kia dealer.
Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud,
sand, or similar hazards, follow these suggestions:
Drive cautiously and allow extra distance for braking.
Avoi ...
Rear camera display
The Rear-Camera Display is not a substitute for proper and safe backing- up procedures.
The Rear-Camera Display may not display every object behind the vehicle. Always
drive safely and use cauti ...
Driving at night
Because night driving presents more hazards than driving in the daylight, here
are some important tips to remember:
Slow down and keep more distance between you and other vehicles, as it may
...