Kia K900: Cruise control switch

Cruise control system

The cruise control system allows you to program the vehicle to maintain a constant speed without depressing the accelerator pedal. This system is designed to function above approximately 20 mph ( ...

To set cruise control speed

1.Move the lever up (to CRUISE), to turn the system on. The CRUISE indicator light will illuminate. 2.Accelerate to the desired speed, which must be more than 20 mph (30 km/h). 3.Lever must be ...

See also:

Instrument panel fuse replacement
1.Turn the ignition switch and all other switches off. 2.Lift the end of strip (1) up. 3.Press the fastener head with screw driver and then pull the fastener out. 4.Lift the rear portion of sma ...

Engine compartment fuse replacement
1.Turn the ignition switch and all other switches off. 2.Remove the fuse panel cover by pressing the tab and pulling up. 3.Check the removed fuse; replace it if it is blown. To remove or insert th ...

Online factory authorized manuals
Service manual: This manual covers maintenance and recommended procedures for repair to engine and chassis components. It is written for the Journeyman mechanic, but is simple enough for most mec ...