Conventional smart key
To remove the mechanical key, press and hold the release button(1) and remove the mechanical key(2).
To reinstall the mechanical key, put the key into the hole and push it until a click sound is heard.
Card type smart key
Push and hold the release lever (1) and remove the mechanical key (2). Insert the mechanical key in to the key hole on the door.
To reinstall the mechanical key, push and hold the release lever (1) and put the key into the hole and push it until a click sound is heard.
To decrease the cruising speed
Follow either of these procedures:
Move the lever down (to SET-) and hold it. Your vehicle will gradually slow
down. Release the lever at the speed you want to maintain.
Move the lever down ...
Power Trunk Non-Opening or Closing Conditions
The power trunk will not open or close automatically, when the vehicle is
moving more than 1.8 mph (3 km/h).
The power trunk can be operated when the engine is not running. However,
the pow ...
Turn Signal Indicator Light
This indicator light blinks:
When you turn the turn signal light on. If any of the following occurs, there
may be a malfunction with the turn signal system. In this case, have your vehicle
insp ...