1.Turn the ignition switch and all other switches off.
2.Remove the fuse panel cover by pressing the tab and pulling up.
3.Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
4.Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized K900 Kia dealer.
CAUTION
After checking the fuse panel in the engine compartment, securely install the fuse panel cover. If not, electrical failures may occur from water contact.
Main fuse
If the main fuse is blown, it must be removed as follows:
1.Remove the fuse panel cover on the right side in the engine compartment.
2.Remove the nuts shown in the picture above.
3.Replace the fuse with a new one of the same rating.
4.Reinstall in the reverse order of removal.
✽ NOTICE
If the main fuse is blown, consult an authorized K900 Kia dealer.
Multi fuse
If the multi fuse is blown, it must be removed as follows:
1.Disassemble the negative cable of battery.
2.Remove the nuts shown in the picture above.
3.Replace the fuse with a new one of the same rating.
4.Reinstall in the reverse order of removal.
✽ NOTICE
If the multi fuse is blown, consult an authorized K900 Kia dealer.
Tire maintenance
In addition to proper inflation, correct wheel alignment helps to decrease tire
wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment.
When you have new tires instal ...
Tire care
For proper maintenance, safety, and maximum fuel economy, you must always maintain
recommended tire inflation pressures and stay within the load limits and weight
distribution recommended for your ...
Lane departure warning system (LDWS)
This system detects the lane with a sensor at the front windshield and notifies
you if it detects that your vehicle leaves the lane.
WARNING
The LDWS does not make the vehicle change lanes. I ...