Kia K900: Warning type
The system will activate when:
1.The system is on
2.Vehicle speed is above about 18.6 mph (30 km/h)
3.Other vehicles are detected in the rear side
If a vehicle is detected within the boundary of the system, a warning light will illuminate on the outside rearview mirror and the head up display.
If the detected vehicle is not in warning range, the warning will turn off according to driving conditions.
The second stage alarm will activate when:
1.The first stage alert is on
2.The turn signal is on to change a lane
When the second stage alert is activated, a warning light will blink on the outside rearview mirror, the head up display and a alarm will sound.
If you move the turn signal switch to the original position, the second stage alert will be deactivated.
Operating conditions
The indicator on the switch will illuminate when the Blind Spot Detection System
(BSD) switch is pressed with the Engine Start/Stop Button ON.
If vehicle speed exceeds about 18.6 mph (30 km/h), t ...
Detecting sensor
The sensors are located inside of the rear bumper.
Always keep the rear bumper clean for the system to work properly. ...
See also:
OFF mode
Press the front OFF button to turn off the air climate control system. However,
you can still operate the mode and air intake buttons as long as the Engine
Start/Stop Button is in the ON po ...
Window opening and closing
Pressing or pulling up the power window switch momentarily to the second detent
position (6) completely lowers or lifts the window even when the switch is released.
To stop the window at the desi ...
Advanced vehicle safety management (AVSM)
The AVSM assists the driver by providing notification is the system detects on
object ahead that is too close to the vehicle and which may require the dirver to
apply the brake pedal or reduce veh ...