Kia K900: On curves
- On curves, the ASCC may not detect a moving vehicle in your lane, and then
your vehicle could accelerate to the set speed. Also, the vehicle speed will
rapidly slow down when the vehicle ahead is recognized suddenly.
- Select the appropriate set speed on curves and adjust your vehicle speed
by depressing the accelerator or brake pedal according to the road condition
ahead and driving condition.
- Your vehicle speed can be reduced due to a vehicle in the adjacent lane.
Adjust your vehicle speed by depressing the brake pedal according to the road
condition ahead and driving condition. Apply the accelerator pedal and select
the appropriate set speed. Check to be sure that the road conditions permit
safe operation of the ASCC.
The ASCC may have limits to its ability to detect distance to the vehicle ahead
due to road and traffic conditions. ...
During uphill or downhill driving, the ASCC may not detect a moving vehicle
in your lane, and cause your vehicle to accelerate to the set speed. Also, the
vehicle speed will rapidly slow do ...
See also:
Window opening and closing
Pressing or pulling up the power window switch momentarily to the second detent
position (6) completely lowers or lifts the window even when the switch is released.
To stop the window at the desi ...
Air bag warning light
The purpose of the air bag warning light in your instrument panel is to alert
you of a potential problem with your air bag - Supplemental Restraint System (SRS).
When the ignition switch is turne ...
To convert to cruise control mode
The driver may choose to only use the cruise control mode (speed control function)
by doing as follows:
1.Turn the ASCC on (the cruise indicator light will be on but the system will
not be acti ...