Storing driver’s seat positions
1.Check that the shift lever is in P (Park) and the Engine Start/Stop Button is in the ON position.
2.Adjust the driver seat, outside rearview mirror, HUD* (Head-up Display), bright ness of the instrument cluster illumination and steering wheel to positions comfortable for the driver.
3.Press the SET button on the control panel. The system will beep once.
4.Press one of the memory buttons (1 or 2) within 5 seconds after pressing the SET button. The system will beep twice when memory has been successfully stored.
Recalling positions from memory
1 Check that the shift lever is in P (Park) and the Engine Start/Stop Button is in the ON position.
2.To recall the position in memory, press the desired memory button (1 or 2). The system will beep once, then the driver seat, outside rearview mirror and steering wheel will automatically adjust to the stored positions.
Adjusting the control switch for the driver seat while the system is recalling the stored position will cause the movement to stop and move in the direction that the control switch is moved.
WARNING
Use caution when recalling adjustment memory while sitting in the vehicle. Push the seat position control switch to the desired position immediately if the seat moves too far in any direction.
2. Evaporative emission control (including ORVR: Onboard Refueling Vapor
Recovery) system
The Evaporative Emission Control System is designed to prevent fuel vapors from
escaping into the atmosphere.
(The ORVR system is designed to allow the vapors from the fuel tank to be loaded
into ...
Cruise SET Indicator Light
This indicator light illuminates:
When the cruise control speed is set. ...
Bag hanger
Pull the strap (1) to hang a bag on the hook (2).
When you are not using the hook, fold the hook.
CAUTION
Do not hang heavy things, since those may damage the hook. ...