Kia K900: Driver position memory system
A driver position memory system is provided to store and recall the driver seat, outside rearview mirror, HUD* (Head-Up Display), bright ness of the instrument cluster illumination and steering wheel positions with a simple button operation.
By saving the desired positions into the system memory, different drivers can reposition the driver seat, outside rearview mirror and steering wheel based upon their driving preference.
If the battery is disconnected, the position memory will be lost and the driving positions should be restored in the system.
WARNING
Never attempt to operate the driver position memory system while the vehicle is moving. This could result in loss of control, and an accident causing death, serious injury, or property damage.
Cushion length adjustment (for driver’s seat)
Push the control switch forward or backward to move the seat cushion to the desired
length. Release the switch once the seat cushion reaches the desired length. ...
Storing positions into memory using the buttons on the door
Storing driver’s seat positions
1.Check that the shift lever is in P (Park) and the Engine Start/Stop Button
is in the ON position.
2.Adjust the driver seat, outside rearview mirror, HUD* (Head-up ...
See also:
Blind spot detection system (BSD)
The Blind Spot Detection System (BSD) uses a radar sensor to alert the driver.
It senses the rear side territory of the vehicle and provides an indication to
the driver if it detects an object ap ...
Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are ...
Illuminated Engine Start/Stop button
Whenever the front door is opened, the ENGINE START/STOP button will illuminate
for your convenience.
The light will go off after about 30 seconds after the door is closed. ...